Close Menu
Home | About | Knowledge Base | Technical | FAQ | Contact
Cold Rolled Products

Continuous Rail Systems

The Continuous Panel System is used when the vertical studs are positioned on the outside of the structural frame. The studs are connected via slotted cleats attached to the floor slabs which are in place to accommodate movement of the main frame. The base of the system requires support, usually through a trak member fixed to the floor slab or additional hot rolled member.
As with the infill panels the studs are designed to carry lateral wind loads, along with the axial load of the external cladding system. This system can offer an increased speed of erection when using 150 deep sections and greater, as studs can be supplied in up to 15m lengths.

Shadow
Shadow
Purlin
Systems More
Purlin Systems
Rail
Systems More
Rail Systems
Eaves
Systems More
Eaves Systems
Channel
Systems More
Channel Systems
Hi-WALL
Systems More
Hi-WALL Systems
Hi-Sola
Systems More
Purlin Systems
Shadow