Close Menu
Home | About | Knowledge Base | Technical | FAQ | Contact
Cold Rolled Products

Infill Panel Systems

 The Infill Panel System forms a secondary structure that typically sits between each floor of the structural frame. It can be used to support a wide range of external finishes as well as the internal lining of the building.
The system primarily consists of stud, trak and header sections which are held together using a range of tek fixings. Studs are typically positioned vertically at either 400mm or 600mm centres depending on the selected finishes. These are held in place at each end by a trak and a header section which are connected to the main frame.
There is no need for cleats or brackets as sections are fixed together through overlapping flanges with a self drilling tekscrew. These sections can also be used to form openings and trimmings within the frame to accommodate doors, windows and other penetrations that may be required.

Shadow
Shadow
Purlin
Systems More
Purlin Systems
Rail
Systems More
Rail Systems
Eaves
Systems More
Eaves Systems
Channel
Systems More
Channel Systems
Hi-WALL
Systems More
Hi-WALL Systems
Hi-Sola
Systems More
Purlin Systems
Shadow